SKU: 18676.6

This kit is a MUST if you installed a 2” or taller suspension Jeep in your 1987-2006 Wrangler (not needed for body lifted Jeeps). The kit fits all newer production NP 231 transfer cases (1987-06). A Slip Yoke Eliminator Kit will eliminate the need to drop your transfer case in order to avoid drive train vibrations that are caused by taller suspension lift kit. The purpose of this kit is to replace the slip yoke portion of the NP 231 with a fixed-yoke, CV style drive shaft assembly. This is the most complete and strongest kit available. Check out the size and thickness of the output shaft housing. NOTE: A CV equipped drive shaft will be required for this conversion kit.

CV driveshaft Sold Separately
sye faq
I’m installing the slip yoke eliminator kit onto my 231 transfer case and have found that the replacement main shaft is larger than my old unit. I can not reinstall the roller bearing back onto the shaft; did I get the wrong kit? 

The slip yoke eliminator kit you have purchased has several improvements made to the unit including the main shaft that make it stronger than the parts you are replacing. The kit comes with the thicker main shaft that does away with the roller needle bearings all together. These parts will not be needed as stated in the installation instructions.

Call to order 706 534 9955

Sale Ends 3/19/10

3/19/10

E-mail a friend about this item.

Return to Catalog