1. Home
  2. Brands
  3. MotoBilt
  4. Bumpers & Steps
  5. Jeep JK Frame Chop Rear Bumper and Cross Member 07-17 Wrangler JK Motobilt

Jeep JK Frame Chop Rear Bumper and Cross Member 07-17 Wrangler JK Motobilt

Your Price: $549.00

The Motobilt Jeep JK Rear Frame Chop Bumper allows for 5 inches of additional ground clearance over the factory receiver hitch. The additional ground clearance you gain is the same as going from a 35 inch tire to a 40 inch.
Features:

  • 3/16 inch Laser cut and CNC bent steel body
  • 3/4 inch Thick laser cut D-Rings that pass through the bumper and welded inside and out
  • Gain 2 3/8 inches up and 3 3/8 inches back of ground clearance
  • 5 inches of additional clearance over the factory receiver hitch
  • Ultra tight design allows the use of a large spare tire
  • Full protection from corner to corner
  • Includes high strength cross member
  • Cross member bolts into factory body mounts then must be welded to the frame
  • Works with factory frame or Motobilt jeep JK back half kit
  • Cross member includes pre-installed threaded inserts for mounting Motobilt JK frame chop rear bumper
  • Threaded mounting holes for JK rear fuel cell skid plate also included
  • Raw metal finish allows you to customize to your needs
  • Template for marking cut locations included and instructions avaialble for download
  • Includes necessary hardware

Notes:

  • Requires cutting of rear frame rails and removal of factory rear cross member
  • Cross member must be welded to frame rails
Part Number: MB1081
Availability: Call for Availability 706-534-9955

The Motobilt Jeep JK Rear Frame Chop Bumper allows for 5 inches of additional ground clearance over the factory receiver hitch. The additional ground clearance you gain is the same as going from a 35 inch tire to a 40 inch.
Features:

  • 3/16 inch Laser cut and CNC bent steel body
  • 3/4 inch Thick laser cut D-Rings that pass through the bumper and welded inside and out
  • Gain 2 3/8 inches up and 3 3/8 inches back of ground clearance
  • 5 inches of additional clearance over the factory receiver hitch
  • Ultra tight design allows the use of a large spare tire
  • Full protection from corner to corner
  • Includes high strength cross member
  • Cross member bolts into factory body mounts then must be welded to the frame
  • Works with factory frame or Motobilt jeep JK back half kit
  • Cross member includes pre-installed threaded inserts for mounting Motobilt JK frame chop rear bumper
  • Threaded mounting holes for JK rear fuel cell skid plate also included
  • Raw metal finish allows you to customize to your needs
  • Template for marking cut locations included and instructions avaialble for download
  • Includes necessary hardware

Notes:

  • Requires cutting of rear frame rails and removal of factory rear cross member
  • Cross member must be welded to frame rails

Related Items

Jeep JK Rear Bumper 07-18 Wrangler JK Crusher Series Bare Steel Motobilt
$549.00
Call for Availability 706-534-9955
Jeep CJ Front Stubby Bumper Bare Steel Motobilt
$249.00
Call for Availability 706-534-9955
Jeep JK Stubby Front Bumper 07-18 Wrangler JK Bare Steel Motobilt
$449.00
Call for Availability 706-534-9955
Jeep JK Front Bumper Skid Plate 07-18 Wrangler JK The Hammer Motobilt
$199.00
Call for Availability 706-534-9955
Jeep JL/Gladiator Front Bumper 2018-Present Wrangler JL/Gladiator Motobilt
$549.00
Call for Availability 706-534-9955

Recently Viewed Items

Mailing List

TOP
0 Items