1. Home
  2. Brands
  3. MotoBilt
  4. Suspension
  5. U-bolt Eliminator Kit For 14 Bolt Dana 70 Sterling Motobilt

U-bolt Eliminator Kit For 14 Bolt Dana 70 Sterling Motobilt

Your Price: $129.99

The Motobilt u-bolt eliminator kit allows you to replace the 4 factory u-bolts with conventional bolts. The u-bolt eliminator kit was designed for serious rock crawlers that want the ultimate clearance underneath their vehicle. The kit is designed to work with 2.5 inch wide leaf springs found on vehicles like the Jeep YJ, XJ, and more. The u-bolt eliminator kit has 3 leaf center pin locations in the spring perch and top bolt plate which allows you to move the axle forward or reward in 1 inch increments. The top plate is made of 3/8 inch thick high strength steel plate bent on the ends for increased structural rigidity and eliminate sharp edges on the leaf spring. The 1/4 inch thick high strength steel plate spring perch has 3 sections to weld to your axle for superior strength. The Motobilt u-bolt eliminator kit is designed for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 14 bolt, Dana 70, and Sterling rear axles. Hardware not included as the thickness of leaf spring packs will vary depending on each setup. This kit is intended to be used with 5/8 inch grade 8 bolts and nylock nuts.The kit is shipped with two fabricated lower spring perches and two upper bolt plates.
Features:

  • U-bolt eliminator kit
  • Designed for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 10.5 Inch 14 bolt, Dana 70, and Sterling rear axles
  • Top plate is made of 3/8 inch thick high strength steel plate
  • 1/4 inch thick high strength steel plate spring perch
  • Designed to work with 2.5 inch wide leaf springs
  • This kit is intended to be used with 5/8 inch grade 8 bolts and nylock nuts
  • 3 leaf center pin locations
  • Sold as kit

Note:

  • Shipped with two fabricated lower spring perches and two upper bolt plates
Part Number: MB4026
Availability: Call for Availability 706-534-9955

The Motobilt u-bolt eliminator kit allows you to replace the 4 factory u-bolts with conventional bolts. The u-bolt eliminator kit was designed for serious rock crawlers that want the ultimate clearance underneath their vehicle. The kit is designed to work with 2.5 inch wide leaf springs found on vehicles like the Jeep YJ, XJ, and more. The u-bolt eliminator kit has 3 leaf center pin locations in the spring perch and top bolt plate which allows you to move the axle forward or reward in 1 inch increments. The top plate is made of 3/8 inch thick high strength steel plate bent on the ends for increased structural rigidity and eliminate sharp edges on the leaf spring. The 1/4 inch thick high strength steel plate spring perch has 3 sections to weld to your axle for superior strength. The Motobilt u-bolt eliminator kit is designed for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 14 bolt, Dana 70, and Sterling rear axles. Hardware not included as the thickness of leaf spring packs will vary depending on each setup. This kit is intended to be used with 5/8 inch grade 8 bolts and nylock nuts.The kit is shipped with two fabricated lower spring perches and two upper bolt plates.
Features:

  • U-bolt eliminator kit
  • Designed for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 10.5 Inch 14 bolt, Dana 70, and Sterling rear axles
  • Top plate is made of 3/8 inch thick high strength steel plate
  • 1/4 inch thick high strength steel plate spring perch
  • Designed to work with 2.5 inch wide leaf springs
  • This kit is intended to be used with 5/8 inch grade 8 bolts and nylock nuts
  • 3 leaf center pin locations
  • Sold as kit

Note:

  • Shipped with two fabricated lower spring perches and two upper bolt plates

Related Items

Adjustable Track Bar Bracket 3 inch Axle Tube Diameter Steel Motobilt
$39.99
Call for Availability 706-534-9955
Jeep Spring Over Perch Offset Motobilt
$39.99
Call for Availability 706-534-9955
4 inch Boomerang Shackle Plate Motobilt
$9.00
Call for Availability 706-534-9955
Rod End XML-10-12 Left Hand 3/4 x 5/8 Motobilt
$23.99
Call for Availability 706-534-9955
Rod End XMR-12 Right Hand 3/4 x 3/4 Motobilt
$23.99
Call for Availability 706-534-9955
Misallignment Spacer 3/4 Inch Stainless Steel Motobilt
$11.99
Call for Availability 706-534-9955
Adjustable Link Mount For 1.75 Inch Tube Motobilt
$6.99
Call for Availability 706-534-9955
Leaf Spring Perches 3.25 Inch Diameter Steel Motobilt
$39.99
Call for Availability 706-534-9955

Recently Viewed Items

Mailing List

TOP
0 Items